Home > Adhesives > Bracket Adhesives > Chemical Cure
Choose a sub-category:
Rely-a Bond Kits Rely-a-Bond Individual Components
Phase II Kits Phase II Individual Components
Sort By:
Page of 1
Phase II Kit Rely-a-Bond Kits
Phase II Kit
Our Price: $120.00
Rely-a-Bond Kits
Our Price: $110.00

Contains Fluoride - Phase II® :

Paste and sealant are formulated with a monomer that contains fluoride and will not reduce bond strength.

Unsurpassed Bond Strength :

The highly filled paste provides a strong mechanical bodn witha ll types of metal and ceramic bracket bases. All plastic and fiber filled brackets will bond chemically to Phase II® when conditioned with Reliance Plastic Conditioner.

Ease of Removal - Phase II® :

has a small particle size glass filler which constitutes a high percentage of the material. The paste forms a solid matrix that bonds stronger to itself than it does to the sealant. As a result, the majority of the paste is removed with the bracket and what remains is easier to remove than conventional composites.

Smooth, Tacky Consistency :

The pastes mix to a viscosity that is easy to apply to the bracket base and will hold the bracket in position after the alignment, without slump. the paste viscosity can be thinned for bonding lingual retainers by adding bonding resin to the mixed paste.

No Refrigeration Required - Phase II® :

Like most Reliance adhesives, Phase II® features a unique catalyst system that does not require refrigeration. An active archwire can be placed 5 minutes after last bracket is in place.

Suggested Uses:

As a Bracket adhesive.

Contains Fluoride - Rely-a-Bond® :

Primer is formulated with a monomer that contains fluoride and will not reduce bond strength. Non-fluoride Formula also available.

Unsurpassed Bond Strength - Rely-a-Bond® :

Formulated with a high filled paste that combines with a unique primer to produce a bond strength to etched enamel that virtually eliminates bonding failures.

Tacking Viscosity - Rely-a-Bond® :

Paste is very tacky, which prevents bracket flotation and penetrates the finest mesh bases.

Variety of Paste Packaging - Rely-a-Bond® :

Paste is available packaged in a jar, preloaded syringe tips or 3.5g push syringed.

Extended Shelf Life - Rely-a-Bond® :

Like most Reliance adhesives, Rely-a-Bond features a unique catalyst system that does not require refrigeration.

Suggested Uses:

As a Bracket adhesive.
14 gm Rely-a-Bond Paste in Preloaded Tips 16 gm Rely-a-Bond Primer Without Fluoride

Contains Fluoride - Rely-a-Bond® :

Primer is formulated with a monomer that contains fluoride and will not reduce bond strength. Non-fluoride Formula also available.

Unsurpassed Bond Strength - Rely-a-Bond® :

Formulated with a high filled paste that combines with a unique primer to produce a bond strength to etched enamel that virtually eliminates bonding failures.

Tacking Viscosity - Rely-a-Bond® :

Paste is very tacky, which prevents bracket flotation and penetrates the finest mesh bases.

Variety of Paste Packaging - Rely-a-Bond® :

Paste is available packaged in a jar, preloaded syringe tips or 3.5g push syringed.

Extended Shelf Life - Rely-a-Bond® :

Like most Reliance adhesives, Rely-a-Bond features a unique catalyst system that does not require refrigeration.

Suggested Uses:

As a Bracket adhesive.
16 gm Rely-a-Bond Primer With Fluoride 14 gm Rely-a-Bond Paste in Jar

Contains Fluoride - Rely-a-Bond® :

Primer is formulated with a monomer that contains fluoride and will not reduce bond strength. Non-fluoride Formula also available.

Unsurpassed Bond Strength - Rely-a-Bond® :

Formulated with a high filled paste that combines with a unique primer to produce a bond strength to etched enamel that virtually eliminates bonding failures.

Tacking Viscosity - Rely-a-Bond® :

Paste is very tacky, which prevents bracket flotation and penetrates the finest mesh bases.

Variety of Paste Packaging - Rely-a-Bond® :

Paste is available packaged in a jar, preloaded syringe tips or 3.5g push syringed.

Extended Shelf Life - Rely-a-Bond® :

Like most Reliance adhesives, Rely-a-Bond features a unique catalyst system that does not require refrigeration.

Suggested Uses:

As a Bracket adhesive.
20 gm Bonding Resin Part B 20 gm Bonding Resin Part A With Fluoride

20 gm Bonding Resin Part B

20 gm Bonding Resin Part A With Fluoride
Phase II Dual Cure18 gm Paste A Catalyst in Jar With Fluoride Phase II 18 gm Paste B In Jar

Combines the Best of Both Chemical and Light cure Polymerization :

the chemical cure working time is 4 minutes to allow several brackets to be positioned from one mix. An initial set can be immediately achieved by light curing from any angle for 10 seconds. This will prevent the loss of bond strength due to saliva contamination. This unique dual cure process allows complete polymerization under metal brackets where light does not reach.

Contains Fluoride- Phase II® Dual Cure -

paste and sealant are formulated with a patented fluoride releasing monomer. Phase II Dual Cure can be used with any chemical or light cure sealant.

Suggested Uses:

As a Bracket adhesive.

Contains Fluoride - Phase II® :

Paste and sealant are formulated with a monomer that contains fluoride and will not reduce bond strength.

Unsurpassed Bond Strength :

The highly filled paste provides a strong mechanical bodn witha ll types of metal and ceramic bracket bases. All plastic and fiber filled brackets will bond chemically to Phase II® when conditioned with Reliance Plastic Conditioner.

Ease of Removal - Phase II® :

has a small particle size glass filler which constitutes a high percentage of the material. The paste forms a solid matrix that bonds stronger to itself than it does to the sealant. As a result, the majority of the paste is removed with the bracket and what remains is easier to remove than conventional composites.

Smooth, Tacky Consistency :

The pastes mix to a viscosity that is easy to apply to the bracket base and will hold the bracket in position after the alignment, without slump. the paste viscosity can be thinned for bonding lingual retainers by adding bonding resin to the mixed paste.

No Refrigeration Required - Phase II® :

Like most Reliance adhesives, Phase II® features a unique catalyst system that does not require refrigeration. An active archwire can be placed 5 minutes after last bracket is in place.

Suggested Uses:

As a Bracket adhesive.
Phase II 18 gm Paste A Catalyst in Jar With Fluoride 7 gm Bonding Resin Part B
7 gm Bonding Resin Part B
Our Price: $24.00

Contains Fluoride - Phase II® :

Paste and sealant are formulated with a monomer that contains fluoride and will not reduce bond strength.

Unsurpassed Bond Strength :

The highly filled paste provides a strong mechanical bodn witha ll types of metal and ceramic bracket bases. All plastic and fiber filled brackets will bond chemically to Phase II® when conditioned with Reliance Plastic Conditioner.

Ease of Removal - Phase II® :

has a small particle size glass filler which constitutes a high percentage of the material. The paste forms a solid matrix that bonds stronger to itself than it does to the sealant. As a result, the majority of the paste is removed with the bracket and what remains is easier to remove than conventional composites.

Smooth, Tacky Consistency :

The pastes mix to a viscosity that is easy to apply to the bracket base and will hold the bracket in position after the alignment, without slump. the paste viscosity can be thinned for bonding lingual retainers by adding bonding resin to the mixed paste.

No Refrigeration Required - Phase II® :

Like most Reliance adhesives, Phase II® features a unique catalyst system that does not require refrigeration. An active archwire can be placed 5 minutes after last bracket is in place.

Suggested Uses:

As a Bracket adhesive.
7 gm Bonding Resin Part B
7 gm Bonding Resin Part A With Fluoride Phase II Dual Cure 6 gm Paste A Catalyst in Screw Syringes With Fluoride
7 gm Bonding Resin Part A With Fluoride
Rely-a-Bond Paste in 3.5 gm Syringe

Contains Fluoride - Rely-a-Bond® :

Primer is formulated with a monomer that contains fluoride and will not reduce bond strength. Non-fluoride Formula also available.

Unsurpassed Bond Strength - Rely-a-Bond® :

Formulated with a high filled paste that combines with a unique primer to produce a bond strength to etched enamel that virtually eliminates bonding failures.

Tacking Viscosity - Rely-a-Bond® :

Paste is very tacky, which prevents bracket flotation and penetrates the finest mesh bases.

Variety of Paste Packaging - Rely-a-Bond® :

Paste is available packaged in a jar, preloaded syringe tips or 3.5g push syringed.

Extended Shelf Life - Rely-a-Bond® :

Like most Reliance adhesives, Rely-a-Bond features a unique catalyst system that does not require refrigeration.

Suggested Uses:

As a Bracket adhesive.