Home > Adhesives > Bracket Adhesives > Light Cure > Phase II Dual Cure Individual Components
Sort By:
Page of 1
20 gm Bonding Resin Part B 20 gm Bonding Resin Part A With Fluoride

20 gm Bonding Resin Part B

20 gm Bonding Resin Part A With Fluoride
Phase II Dual Cure18 gm Paste A Catalyst in Jar With Fluoride Phase II 18 gm Paste B In Jar

Combines the Best of Both Chemical and Light cure Polymerization :

the chemical cure working time is 4 minutes to allow several brackets to be positioned from one mix. An initial set can be immediately achieved by light curing from any angle for 10 seconds. This will prevent the loss of bond strength due to saliva contamination. This unique dual cure process allows complete polymerization under metal brackets where light does not reach.

Contains Fluoride- Phase II® Dual Cure -

paste and sealant are formulated with a patented fluoride releasing monomer. Phase II Dual Cure can be used with any chemical or light cure sealant.

Suggested Uses:

As a Bracket adhesive.

Contains Fluoride - Phase II® :

Paste and sealant are formulated with a monomer that contains fluoride and will not reduce bond strength.

Unsurpassed Bond Strength :

The highly filled paste provides a strong mechanical bodn witha ll types of metal and ceramic bracket bases. All plastic and fiber filled brackets will bond chemically to Phase II® when conditioned with Reliance Plastic Conditioner.

Ease of Removal - Phase II® :

has a small particle size glass filler which constitutes a high percentage of the material. The paste forms a solid matrix that bonds stronger to itself than it does to the sealant. As a result, the majority of the paste is removed with the bracket and what remains is easier to remove than conventional composites.

Smooth, Tacky Consistency :

The pastes mix to a viscosity that is easy to apply to the bracket base and will hold the bracket in position after the alignment, without slump. the paste viscosity can be thinned for bonding lingual retainers by adding bonding resin to the mixed paste.

No Refrigeration Required - Phase II® :

Like most Reliance adhesives, Phase II® features a unique catalyst system that does not require refrigeration. An active archwire can be placed 5 minutes after last bracket is in place.

Suggested Uses:

As a Bracket adhesive.
3 cc Light Bond Sealant With Fluoride Phase II Paste B in 6 gm Screw Syringe

Available With or Without Fluoride - Light Bond™ :

Paste and Sealant are formulated with a patented monomer that contains fluoride. It is available without fluoride in Push Syringe Only.

Unsurpassed Bond Strength :

The Light Bond™ Paste is a highly filled material that delivers maximum bond strength in all situations with all types of appliances.

Smooth Tacky Paste Viscosity:

The viscosity of Light Bond™ Paste is very tacky which prevents bracket flotation. If a thinner paste viscosity is desired for bonding lingual retainers and acrylic appliances, Light Bond™ Thin or Medium Paste is available. Please specify when ordering.

Total Paste Polymerization Under All Bracket Bases - Light Bond™ :

Comprised of a catalyst and filler that reflects the light to insure complete polymerization under any appliance: metal, ceramic, sapphire or plastic. One the material has been properly cured, an arch wire can be placed immediately.

Ease of Removal - Light Bond™ :

is a small particle glass filed material designed for orthodontic use that allows maximum penetration of filler into the finest screen mesh base and removal without enamel scarring.

Suggested Uses:

As a Bracket adhesive.

Contains Fluoride - Phase II® :

Paste and sealant are formulated with a monomer that contains fluoride and will not reduce bond strength.

Unsurpassed Bond Strength :

The highly filled paste provides a strong mechanical bodn witha ll types of metal and ceramic bracket bases. All plastic and fiber filled brackets will bond chemically to Phase II® when conditioned with Reliance Plastic Conditioner.

Ease of Removal - Phase II® :

has a small particle size glass filler which constitutes a high percentage of the material. The paste forms a solid matrix that bonds stronger to itself than it does to the sealant. As a result, the majority of the paste is removed with the bracket and what remains is easier to remove than conventional composites.

Smooth, Tacky Consistency :

The pastes mix to a viscosity that is easy to apply to the bracket base and will hold the bracket in position after the alignment, without slump. the paste viscosity can be thinned for bonding lingual retainers by adding bonding resin to the mixed paste.

No Refrigeration Required - Phase II® :

Like most Reliance adhesives, Phase II® features a unique catalyst system that does not require refrigeration. An active archwire can be placed 5 minutes after last bracket is in place.

Suggested Uses:

As a Bracket adhesive.
Phase II Dual Cure 6 gm Paste A Catalyst in Screw Syringes With Fluoride