Home > Tooth Preparation
Choose a sub-category:
Etching Agents Self Etching Primer
Conditioners & Sealants Product Instruction Videos
Sort By:
Page of 3
1st and Final 8 cc Porcelain Conditioner
1st and Final
Our Price: $27.56

1st & Final is an orthodontic pumice designed for polishing enamel. Pre-mixed and pre-packaged for ultimate convenience. Can be used as the final finishing steps with the Reliance Renew Finishing System.
8 cc Porcelain Conditioner is for bonding to ceramic crowns.

• Effective with: porcelain, zirconia and lithium disilicate
Custom I.Q. Indirect Bonding Sealant Part A Custom I.Q. Indirect Bonding Sealant Part B
Product has been discontinued. For a comparable Chemical Cure sealant system, please see Maximum Cure Product has been discontinued. For a comparable Chemical Cure sealant system, please see Maximum Cure
20 gm Bonding Resin Part A With Fluoride 7 gm Bonding Resin Part A With Fluoride

20 gm Bonding Resin Part A With Fluoride
7 gm Bonding Resin Part A With Fluoride
7 gm Bonding Resin Part B 10 cc Plastic Conditioner
7 gm Bonding Resin Part B
Our Price: $26.50
10 cc Plastic Conditioner
Our Price: $19.61
7 gm Bonding Resin Part B
6 cc Assure Universal Bonding Resin 8 ml Metal Primer
8 ml Metal Primer
Our Price: $26.50

Bonds to Any Enamel Type - Assure® :

Will bond to any enamel type, wet or dry, normal or atypical, including deciduous, bleached, and dentin. In addition, Assure will bond to composite and metal surfaces without any additional primer.

Assure® Universal Bonding Resin :

Can be used under any chemical, light or dual cure adhesive, regardless of manufacturer.

Suggested Uses:

As a Bracket adhesive, Wet field bonding.
Porc-Etch and Barrier Gel Enhance Adhesion Booster Part A 3cc
Porc-Etch and Barrier Gel
Our Price: $20.14

Enhance™

Adhesion Booster will increase the adhesion of any chemical, light or dual cure system to the following surfaces: fluorosed, hypo-calcified or deciduous enamel, acrylic, bleached or wet enamel, dentin, metal surfaces, composite restorations and enamel.
Enhance Adhesion Booster Part A 6cc Enhance Adhesion Booster Part B 3cc

Enhance™

Adhesion Booster will increase the adhesion of any chemical, light or dual cure system to the following surfaces: fluorosed, hypo-calcified or deciduous enamel, acrylic, bleached or wet enamel, dentin, metal surfaces, composite restorations and enamel.

Enhance™

Adhesion Booster will increase the adhesion of any chemical, light or dual cure system to the following surfaces: fluorosed, hypo-calcified or deciduous enamel, acrylic, bleached or wet enamel, dentin, metal surfaces, composite restorations and enamel.
Enhance Adhesion Booster Part B 6cc Enhance L.C. (Light Cure) Adhesion Booster

Enhance™

Adhesion Booster will increase the adhesion of any chemical, light or dual cure system to the following surfaces: fluorosed, hypo-calcified or deciduous enamel, acrylic, bleached or wet enamel, dentin, metal surfaces, composite restorations and enamel.

Enhance™ L.C

Provides all the benefits of chemical cure Enhance without the mixing. Must be used with a light cure sealant. This single liquid (No mixing) is applied to the etched enamel surface then lightly air dried. Light Bond Sealant is placed directly onto the enhance L.C and light cured for 10 seconds (20 seconds required if PRO SEAL is used)
Prep Step Prophy Angles L.E.D. Pro Seal
Prep Step Prophy Angles
Our Price: $50.88
L.E.D. Pro Seal
Our Price: $74.20
144 Individually wrapped and dispoasble Prep Step Prophy Angles are manufactured to run smooth and vibration free. Latedx free, 4 web and soft cup are designed to fit a slow speed hand piece. Just throw away after use.

PRO SEAL® and L.E.D PRO SEAL® :

The first sealants that will completely set without an oxygen inhabited layer. this creates a smooth hard surface that protects the enamel.

PRO SEAL® and L.E.D PRO SEAL® :

Are highly filled, no mix light cure sealants that resist toothbrush abrasion.

PRO SEAL® and L.E.D PRO SEAL® :

also contain a UV fluorescing agent for easy monitoring of sealant coverage.

PRO SEAL® and L.E.D PRO SEAL® :

can be used under any light cure, chemical cure or dual cure paste system. U.C.S.F and M.C.G tests prove the long term benefits of this enamel protective sealant.

Pro Seal - Light Cure Sealant 20gm Economy Maximum Cure Sealant Part A (Fluoride Releasing)

PRO SEAL® and L.E.D PRO SEAL® :

The first sealants that will completely set without an oxygen inhabited layer. this creates a smooth hard surface that protects the enamel.

PRO SEAL® and L.E.D PRO SEAL® :

Are highly filled, no mix light cure sealants that resist toothbrush abrasion.

PRO SEAL® and L.E.D PRO SEAL® :

also contain a UV fluorescing agent for easy monitoring of sealant coverage.

PRO SEAL® and L.E.D PRO SEAL® :

can be used under any light cure, chemical cure or dual cure paste system. U.C.S.F and M.C.G tests prove the long term benefits of this enamel protective sealant.

The traditional self cure bonding agent does not totally polymerize due to oxygen inhibition. Consequently, it is rinsed away at the conclusion of the appliance bonding procedure leaving exposed etched enamel unprotected.


Maximum Cure® :

This sealant will set in a thin layer. A unique catalyst system prevents oxygen interference during polymerization. The whole labial or lingual tooth surface can be sealed.

Maximum Cure® :

Sealant is formulated with a patented fluoride monomer.

Chemical Cure System - No curing Light Required :

With Maximum Cure Sealant, multiple teeth can be sealed in the time it would take to cure one tooth with a light cure material.

Also Available: Maximum Cure Filled Sealant for longer lasting protection.